In order to better extend the service life of the high-pressure carbon dioxide booster pump, users should understand some maintenance knowledge. So, how to adjust the high-pressure carbon dioxide booster pump for maintenance work? The editor is here to take a simple "science popularization" with Suncenter DGA10 portable high-pressure carbon dioxide booster pump as an example.

Some technicians pointed out that the user’s daily maintenance of high-pressure carbon dioxide booster pumps should be divided into two parts: daily inspection and regular maintenance. Check whether the driving piston and driving air pressure are normal, whether the pump head exhaust cooling system is working properly, and the high pressure When the carbon dioxide booster pump is operating, there is no abnormal sound and large vibration, whether the working action is flexible, whether there is abnormal vibration or noise, etc. At the same time, clean the exterior regularly to prevent corrosion, drain and clean the air source or filter system, etc.

Second, the regular calibration of the high-pressure carbon dioxide booster pump. The user can determine the period of regular calibration for each part based on the information provided by the manufacturer. Note that for some high-pressure carbon dioxide booster pumps used in high pressure, high pressure drop or strong corrosive occasions, the inspection cycle should be shortened. The content of the regular verification is mainly the static performance test of the high-pressure carbon dioxide booster pump, or corresponding test items can be added, such as the test of the flow characteristics of the high-pressure carbon dioxide booster pump.

Again, the maintenance of the high-pressure carbon dioxide booster pump. Users can carry out emergency maintenance, regular maintenance and predictive maintenance according to the actual situation. Among them, for emergency maintenance, when the high-pressure carbon dioxide booster pump has a small problem and cannot meet the process operation requirements, emergency maintenance can be selected. It can be said that emergency maintenance is maintenance after the failure of the high-pressure carbon dioxide booster pump, while regular maintenance and predictive maintenance are maintenance before the failure of the high-pressure carbon dioxide booster pump.

In addition, users need to pay attention to the safe operation of high-pressure carbon dioxide booster pumps and related accessories used in hazardous locations, such as checking whether the sealing cover is tightened, the operation of the safety barrier, and the tightness of the guide connecting sleeve, etc. Ensure the safe operation of the high-pressure carbon dioxide booster pump and related accessories. In addition, if the high-pressure carbon dioxide booster pump and the transmission parts of the accessories are worn, the parts should be replaced and repaired in time. After replacement and repair, the transmission should be flexible and the transmission gap should be as small as possible to ensure the safe and stable operation of the high-pressure carbon dioxide booster pump.

In fact, many users think that maintenance should be carried out only when there is a problem with the equipment, but this is not the case. Suncenter engineers suggested that users should carry out preventive maintenance. It sets up corresponding maintenance schedules according to the operating conditions of different equipment, and performs maintenance before the equipment fails. Maintenance is performed before failure occurs, which can greatly reduce the probability of failure.

Do a good job in the daily and regular maintenance of the portable high-pressure carbon dioxide booster pump (pneumatic booster pump), and enterprise users can safely and efficiently produce "no problem"!

website: www.suncenter-cn.com

Contact: Manager Yi

Whatsapp(Wechat):008615019143208